Latest News
In its continuous strive to meet the needs of its clients, CODE acquired Professional Indemnity (PI) from ADIR Insurance.

Bilal S. Hamad, PhD, Fellow ACI

Structural Engineering & Concrete Technology

  

Nationality

Lebanese

Place of Birth

Beirut, Lebanon

Date of Birth

January 18, 1955

Languages

Arabic and English

Marital status

Married with 4 children


CONTACT INFO

Mina El Hosn, Phoenicia St. Sfeir Bldg. 6th floor, Facing Radisson Hotel, Beirut, Lebanon; Tel/Fax: 00961 1 369693, Mobile: 00961 3 333580, Email: [email protected] and        [email protected]  

CURRENT POSITION

  • Professor of Structures & Concrete Technology in the Department of Civil and Environmental Engineering at the American University of Beirut (AUB)
  • General Manager of "CODE Consultants & Designers sarl”

DEGREES

  • Bachelor of Engineering in Civil Engineering, with distinction, AUB, 1976 (Ranked 1st with a final year graduation average of 95.44/100)
  • Masters of Science in Civil Engineering, GPA = 4.0, University of Texas at Austin, 1979
  • PhD in Civil Engineering, GPA = 4.0, University of Texas at Austin, 1990

PROFESSIONAL SOCIETIES

  • Order of Engineers, Beirut
  • American Society of Civil Engineers ASCE
  • American Concrete Institute ACI, Fellow
  • International Concrete Repair Institute ICRI
  • American Concrete Institute ACI Lebanon Chapter
  • Lebanese Concrete Society

AREAS OF SPECIALIZATION

  • Design and Behavior of Reinforced Concrete Structures
  • Bond and Development of Reinforcement
  • Assessment, Repair, and Strengthening of Reinforced Concrete Structures
  • Plain Concrete and Concrete Technology
  • Steel Structures
  • Structural Analysis
  • Earthquake Engineering

AREAS OF RESEARCH

  • Bond and Development of Reinforcement. Effect of several variables on bond strength and bond-slip characteristics of reinforcement anchored or spliced or hooked in bond-critical regions of reinforced concrete structures. Variables include bar rib geometry, bar coating, bar galvanization, transverse reinforcement, specimen type and size, concrete strength, and the use of pozzolanic materials such as fly ash and silica fume. Other variables include the effect of fiber reinforcement added in the bond critical regions during casting and confinement of the bond critical regions with fiber reinforced polymer wraps.
  • Repair and Strengthening of Reinforced Concrete Structures. Case studies of under-designed and cracked reinforced concrete structures. Case studies of the effect of fire, blasting, or earthquakes on reinforced concrete structures. Evaluation and assessment techniques. Methods of repair and strengthening.
  • Concrete Technology. Study of the effect of different variables on properties of fresh and hardened concrete including: cement type, pozzolanic materials and by-products, chemical admixtures, and industrial wastes. Concrete durability: chemical and physical attacks. High strength concrete. Self-compacting concrete. Study of the geology and the petrographic, chemical, and mechanical properties of aggregates.
  • Sustainable concrete construction materials: The use of natural fibers such as hemp to improve performance of construction components and reduce depletion in natural resources. The objective is to identify new materials or create novel cement/concrete mixes that encapsulate sustainable elements while satisfying strength and improving performance requirements such as durability and thermal properties. Study of the effect of replacing natural coarse aggregates with recycled coarse aggregates from tested cylinders in batching plants on the plastic & hardened mechanical properties of concrete and on the structural performance of reinforced concrete members.

PUBLICATIONS

  • Has more than 100 publications including reports, refereed international journal papers, and refereed papers in proceedings of international and regional conferences. All publications are in the areas of structural engineering and concrete and material technology.
  • Has been reviewer of several papers submitted for publication in international refereed journals including ACI (American Concrete Institute), ASCE (American Society of Civil Engineers), and Elsevier journals.

AWARDS

  • Received The WAAAUB 2013 Distinguished Graduate Award in grateful recognition of exceptional service to AUB and its alumni and for remarkable contribution to the profession, June 22, 2013.
  • Was elected in the Academy of Distinguished Alumni in the Department of Civil, Architectural, and Environmental Engineering of the University of Texas at Austin. The induction ceremony was on November 11, 2011.
  • Received the 1995 ACI (American Concrete Institute) Structural Research Award for best paper published in 1993-94: "Strength of Epoxy-Coated Reinforcing Bar Splices Confined with Transverse Reinforcement", ACI Structural Journal, V.90, No. 1, Jan.-Feb. 1993, pp. 77- 88.

HONORS

  • Established in 2016 the "Bilal Salim Hamad prize for academic achievement” awarded yearly to the students(s) with highest average in the "General Science” classes of Makassed high schools.
  • Was elected Mayor of Beirut 2010-2016.
  • Was the Keynote Speaker at the "Future Concrete 2014” conference organized by ACTS and co-sponsored by ACI, ASTM, and fib; The Royal Hotel, Dbayyeh, Lebanon, June 19, 2014.
  • Was elected as member of the Board of Trustees of Makassed Foundation for a 4-year term, March 2014.
  • Was a speaker in the Davis-Beirut Reaction Ceremony honoring Professor Makhlouf Haddadin, Bathish Auditoium; AUB West Hall, October 8, 2013.
  • Was a speaker at the inauguration of the new IC Elementary School, June 18, 2013.
  • Was the Keynote Speaker at the WAAAUB 2011 Convention and Leadership Assembly; West Hall, AUB, December 27, 2011.
  • Was elected President of the American Concrete Institute ACI Lebanon Chapter for a two-year term: December 2004-December 2006. The Chapter received the "ACI Outstanding Chapter” Award for 2004.
  • Was elected President of the Lebanese Concrete Society for a two-year term: December 2004-December 2006.
  • Was voted as the "Teacher of the year” by the CE 2005 graduating class.
  • Served as an examiner for a PhD degree at the University of New South Wales, Canberra, Australia, Fall 2004-2005; Thesis title: "Particularities of the structural behavior of reinforced high strength concrete slabs”.
  • Was invited as a keynote Speaker at the First International Conference of Insights on Successful Engineering Practices; Beirut, Lebanon, January 10-29, 2004.
  • Was elected Fellow of the American Concrete Institute (ACI) in October 2003.
  • Since 1990, received the highest teaching appraisal average many times in the Department and several times in the Faculty.
  • Was elected by the graduating class of 1998 as : The most memorable teacher
  • Was either a teaching or research assistant throughout his graduate studies at the University of Texas at Austin.
  • Was placed on the Dean's honor list throughout his undergraduate studies at AUB.

PROFESSIONAL EXPERIENCE

Over 40 years, Dr. Hamad has acquired wide experience in the design, supervision, and construction of reinforced concrete structures in Lebanon, Jordan, Nigeria and other African countries, Saudi Arabia, and other Arab Gulf states.

Dr. Hamad is the founder and General Manager of "CODE Consultants & Designers sarl”, an engineering firm with experts in the different architectural, structural, and electro-mechanical areas of engineering.

CODE’s Areas of Expertise:

  • Design and modeling of reinforced concrete, prestressed concrete (pre-tensioned and post-tensioned), and structural steel structures including buildings, towers, highway pavements, and bridges. Bridges include small, medium, and large span bridge crossings in urban and rural settings. The design includes architectural, structural, and electro-mechanical trades.
  • Preparation of execution and shop drawings for all design trades.
  • Technical control, design review, optimization, and Value Engineering of major reinforced concrete and steel structures.
  • Strengthening of existing structures.
  • Assessment, strengthening, and repair of war-damaged, fire-damaged, and earthquake-damaged reinforced concrete structures.
  • Supervision of structural construction.
  • Preparation of tender documents including BOQ’s and Specifications.
  • Sustainable construction and sustainable material technology.

Brief summary of Dr. Hamad’s professional experience

1. Summer 1976
Trainee with Dar Al Handasah (Shair)

2. 1976 TO 1977
Structural Engineer with Dar Al Handasah (Shair). Beside other smaller assignments, was a member in a team of four structural engineers who designed the Shmaisani Center in Amman, Jordan.

3. 1979 TO 1982
Senior Structural Engineer with Bureau D'Ingenieurs Conseils, where he was in charge of the design and supervision of several residential, educational, and commercial projects in Lebanon, Jordan, and Saudi Arabia.

4. 1983 TO 1988
Established an engineering office. Jobs included:

    • Design of several concrete and steel building structures in Lebanon, Jordan, and Saudi Arabia
    • Concrete works construction of several building structures in Beirut
    • Design and execution of repair and strengthening schemes of several building structures which were hit and partially damaged during the Israeli invasion of Beirut
    • Member of a team of experts commissioned in 1987 to investigate more than 30 under-designed building structures in South Lebanon (Sour). Assessment reports were prepared, strengthening and underpinning schemes were designed, and construction procedures were supervised.

5. 1990 to Present

5.1 Design and supervision of Reinforced concrete structures

      • Kaaki residential tower, Beirut, 1991; Structural design and supervision 
      • Chehab Oxygen Plant, Dibbiyyeh, 1991; Structural design and supervision 
      • Jawa building, Jeddeh, 1992; Structural design 
      • Ghaith residential bldg., Khaldeh, 1993; Structural design and supervision 
      • Ali Saleh residential Bldg., Beirut, 1993; Structural design and supervision 
      • Verdun Plaza 2, Beirut, 1993; Structural design and supervision 
      • Prince Bandar Bin Mohamad Bin AbdulAziz Al Saud Commercial & Residential Comlex, Saudia, 1993; Structural design 
      • Prince Turki Bin Bandar Bin AbdulAziz Al Saud Palace, Riyadh, Saudia, 1993; Structural design 
      • Malas residential Bldg., Beirut, 1993; Structural design and supervision 
      • Arakji Aluminum Plant, Khaldeh, 1994; Structural design 
      • Humaidy Villa, Kuwait city, 1994; Structural design 
      • Idriss clinics bldg., Beirut facing AUH, 1994; Structural design and supervision  
      • Tyre cultural center (theatre), Tyre, 1995; Structural design (project was not executed) 
      • Beirut Bank for Commerce Housing Project, Dibbiyyeh, 1995; Structural design 
      • H E Faris Boueiz palace, Zouk Mkayel, 1995; Structural design 
      • Khatib & Nassab residential Bldg., Bir Hassan, 1996; Structural design and supervision 
      • Concordia residential and commercial complex, Beirut (near Jeffinor), 1996; Structural design  
      • Kfarchima Barracks long-span warehouses and administrative bldg., Kfarchima, 1996; Structural design and supervision 
      • Ramzy Majed Residential complex, Kfarchima, 1996; Structural design and supervision  
      • Islamic Association for Higher Education bldg., Ramlet El-Baida, 1997; Structural design 
      • Jawa Residential Bldg., Jeddeh, Saudi Arabia, 1997; Structural design 
      • Villa Barada and Villa Saade, El-Meshref, 1997; Structural design  
      • Maher Zuheir Al-Azem residence, Jeddeh, Saudi Arabia, 1998; Structural design 
      • Al-Nasser residence, Jeddeh, Saudi Arabia, 1998; Structural design 
      • Piling wall system between Mediterranean Bank Verdun and Lot 732, Verdun, 1998-99; Structural design and supervision 
      • Elie Gharzouzy residence, Jbeil, 1999; design 
      • Conference Center of the Lebanese University Campus, Hadath, ZUBLIN, 1998-99; structural design and structural execution drawings 
      • Saida Municipal Stadium, Saida, CBA Group, 1999; Structural design and structural execution drawings 
      • Metroplolitan Hotel, Horsh Tabet, Al Habtoor Group, Fall 2003-2004; Structural and electro-mechanical design of the lobby extension 
      • Baalbeck Municipal Stadium, Baalbeck, CBA Group, 2004-2005; Structural design and structural execution drawings 
      • Jamil and Paul Mansour Villa, Lot No. 8314 Faqra, Kafar Zebian, CBA Group, Summer and Fall 2004; Structural design 
      • Habtoor Land Hotel, Horsh Tabet, Al Habtoor Group, Fall 2004-2005; Geotechnical site investigation, geotechnical stability analysis, and structural design, (Project was not executed) 
      • Saraya Al Aqaba Project, Al Aqaba, Jordan, LACECO International, Fall-Spring 2006; Modeling and structural design of the Beach Hotel and the Lighthouse Hotel in the project including: the design of the reinforced concrete foundation and columns and shear walls, and design and detailing of the post-tensioned slabs 
      • Park Avenue residential bldg., Solidere, Beirut, LACECO International, Fall-Spring 2006; Structural design of the building including: the design of the reinforced concrete foundation and columns and shear walls, and design and detailing of the post-tensioned slabs 
      • Bella Fiesta Office Bldg., Lot 365, Mina El Hosn, Beirut, MAK Contracting (AL Kharafi), 2006-2008; Evaluation of an existing structure and remodeling the structure which is an old office building to be an office building including providing execution files and drawings for architectural, structural, and electro-mechanical design 
      • Chekka Tunnel, Chekka, North Lebanon, CDR, 2003–2004; Structural, geotechnical, geological, and hydro-geological assessment and developing strengthening and rehabilitation procedures, drawings, and bidding documents 
      • Chekka Tunnel, Chekka, North Lebanon, CDR, 2006-2008; Supervision of repair, strengthening, and rehabilitation works 
      • Taraya Public School, Taraya, Bekaa, Ministry of Education, 2006-2007; Complete design and preparation of execution files and drawings for architectural, structural, and electro-mechanical trades, and tender documents 
      • Abdali Boulevard, Amman, Jordan, LACECO International, Summer-Fall 2006; Structural design and modeling of all 27 buildings in the three blocks of the project 
      • New Glover Project, Lagos State, Nigeria, Mr. Youssef Fattal, Spring and summer 2007; Structural design & modeling and electro-mechanical design of the twin residential tower (13 floors each) projct and preparation of complete BOQ 
      • Sixth Gerrard Project, Lagos State, Nigeria, Mr. Youssef Fattal, Spring and summer 2007; Structural design & modeling and electro-mechanical design of the twin residential tower (15 floors each) project and preparation of complete BOQ 
      • Lekki Mosque, Lagos State, Nigeria, Mr. Youssef Fattal, Summer 2007; Architectural & electro-mechanical design and review of the structural design and preparation of complete BOQ 
      • Taher Residential Bldg., Bliss St. Beirut, Lebanon, Beam Engineering & Construction Co., Spring 2007; Structural design and supervision of the construction work 
      • Al-Matal Villa, Samriyah Farm, Riyadh, Saudi Arabia, Saudi Oger LTD., Fall 2007; Complete design and preparation of: structural execution drawings, architectural & electro-mechanical tender design drawings, and complete BOQ 
      • Ayman Hariri Villa, Riyadh, Saudi Arabia, Saudi Oger LTD., Fall 2007-2008; Structural design and preparation of structural execution drawings and BOQ 
      • Al-Sari Villa technical building, Jeddeh, Saudi Arabia, Saudi Oger LTD., Fall 2007-2008; Structural design and preparation of structural execution drawings 
      • Banban Villa Health club, Riyadh, Saudi Arabia, Saudi Oger LTD., Fall 2007-2008; Structural design and preparation of structural execution drawings 
      • Five prestressed bridges at the Abdali Interchange, Amman, Jordan, LACECO International, Fall & Spring 2007-2008; Structural design and preparation of BOQ 
      • Banana Offshore Residence, Lagos State, Nigeria, Mr. Youssef Fattal, 2008; structural design & modeling and preparation of BOQ 
      • Nipost Office towers, Lagos State, Nigeria, Mr. Youssef Fattal, 2008; Structural design & modeling and preparation of BOQ 
      • Abayak Malabo Commercial Center, Guinee Equatoriale, Nassar Engineering Services, 2008; Structural design and preparation of structural execution drawings and BOQ. 
      • Building 0001 in Pama Villa, Riyadh, Saudi Arabia, Saudi Oger LTD., 2008; Structural design and preparation of structural execution drawings 
      • Upgrading of King Abdulllah Bin Abdul Aziz Road, Riyadh, Saudi Arabia, Saudi Oger LTD., 2007-2008; Structural design of the tunnel structures, underpasses, and retaining walls 
      • Saifi 1079 Residential Bldg., Beirut, Lebanon, Saifi 1079 S.A.L, 2008; Structural design & modeling and electro-mechanical design, and preparation of BOQ & Specifications 
      • Verdun 530 Commercial and Residential tower, Verdun St., Beirut, Lebanon, MED Group, 2008-2009; Structural design and preparation of structural execution drawings and BOQ 
      • Bab El Tabbaneh 2nd School, Tripoli, Lebanon, Oger Liban, 2009; Structural design and preparation of structural execution drawings and BOQ 
      • Jabal Mohsen School, Lot 65 Tripoli, Lebanon, Oger Liban, 2009; Structural design and preparation of structural execution drawings and BOQ 
      • Crazy Farm Villa, Lot 13, Mansoura, Bekaa, Lebanon, 2009; Structural design and preparation of structural execution drawings 
      • Bourdillon Towers, Lagos State, Nigeria, Ibalex Group of Companies (Mr. Youssef Fattal), 2010; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Palace of Justice and Ministry of Justice, Beirut, Lebanon, Ministry of Public Works & Transport (Al Mabani Directory), 2010-2016; Strengthening the existing structural frames and the foundation systems to resist earthquakes; structural design & modeling; preparation of execution drawings and tender documents; and supervision of construction works 
      • Saifi 98 Furnished Apartments Building, Beirut, Lebanon, Mr. Shukri Kurban, 2010; Complete architecture, structural, & electro-Mechanical design and preparation of tender documents
      • Musaitbah 674 (Dinnaoui Building), Beirut, Lebanon, DSM (Mr. Waleed Dalloul), 2010; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Titanium Towers, Ain El Tineh, Beirut, Lebanon, Mr. Hassa Kronfol, 2010-2011; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Sioufi Twins, Achrafieh, Beirut, Lebanon, Mr. Karim Fattal, 2010-2011; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Achrafieh 4898, Beirut, Lebanon, A&H and Mr. Wajdi Abu Hamzeh and Co., 2010-2011; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Bachoura 1544, Beirut, Lebanon, AAA, 2010-2011; Structural design & modeling and preparation of structural drawings, BOQ, and specifications; and supervision of structural works 
      • Bliss 330, Beirut, Lebanon, A&H, 2010-2011; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Ras Beirut 3361, Beirut, Lebanon, Jamil Ibrahim EST, 2010-2011; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Marfaa 1268 - Stone Garden, Beirut, Lebanon, Red s.a.l, Architect Batimat sal, 2010-2016; Structural design & modeling; preparation of structural execution drawings, BOQ, and specifications; and supervision of structural works
      • Dalfa Towers, Lot 733 Ain El Mreisseh, Beirut, Lebanon, Dalfa, 2010-2019; Structural design & modeling; electro-mechanical design, preparation of structural and electro-mechanical execution drawings, BOQ, and specifications; and supervision of structural works 
      • Palace of Justice and Ministry of Justice, Beirut, Lebanon, Ministry of Public Works & Transport (Al Mabani Directory), 2010-2019; Strengthening design of the existing structural frames and the foundation systems to resist earthquakes; structural design & modeling; preparation of execution drawings and tender documents; and supervision of construction works 
      • Saifi 405, Beirut, Lebanon, Saifi 405, 2011; Structural design & modeling; electro-mechanical design, preparation of structural and electro-mechanical execution drawings, BOQ's, and specifications; and supervision of structural works 
      • AL-Qateef Bridge, Damam – Ihsa, Saudi Arabica, Salco, 2011; Architecture & Structural design and modeling; preparation of shop drawings, BOQ, and specifications 
      • Gerrad 46, Lagos State, Nigeria, Ibalex Group of Companies (Mr. Youssef Fattal), 2011; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Ghanada Island Palace, Abu Dhabi, ALGECO, 2011; Structural design & modeling and preparation of structural drawings 
      • Bachoura 1234, Beirut, Lebanon, ZEN sal, 2012; Structural design & modeling; electro-mechanical design; preparation of structural and electro-mechanical execution drawings, BOQ, and specifications; and supervision of structural works 
      • Sassine 1580, Achrafieh, Beirut, Lebanon, Mr. Karim Fattal, 2012; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Bella Casa project, Adlieh 998, Beirut, Lebanon, 2012; Structural design & modeling, electro-mechanical design, preparation of structural and electro-mechanical execution drawings, BOQ, and specifications; and supervision of structural works; project was halted after the schematic phase
      • Imam Shafei Mosque, Sanayeh, Beirut, Dar El Fatwa, Architect AISO (Azmi Fakhoury), 2012; Structural design & modeling and preparation of structural drawings, BOQ, and specifications
      • Islamic Welfare Association School, Parcels I, II, & III of Lot 213, Saida, South Lebanon, ISWA, Architect AISO (Azmi Fakhoury), 2012; Structural design & modeling and preparation of structural drawings 
      • Ain Al Mreisseh, Lot 700, Beirut, Lebanon, RAMCO, 2012; Structural design & modeling and preparation of structural drawings, BOQ, and specifications
      • Glover 44, Lagos State, Nigeria, Achour Holding, 2012; Structural design & modeling; electro-mechanical design; preparation of structural and electro-mechanical execution drawings, BOQ, and specifications
      • Saab Bldg., Lot 3755 Musaitbeh, Lebanon, Mr. Mohamad Saab, 2012-2013; Complete architecture, structural, & electro-mechanical designs and preparation of tender documents
      • Villa Ayoub Ain Saade, Lot 3158, Mr.Halim Ayoub, Architect Rachid Karam, 2013; Structural design & modeling; preparation of structural execution drawings, BOQ, and specifications; and site supervision of structural works
      • Dammam Park (2) – Storm Water management – beautification and effluent disposal project, Saudi Arabia, SALCO, 2013; Structural Design of Bio Swale weirs and preparation of shop drawings
      • Sky Tower, Beirut, Lebanon, Sky Tower sal, 2013-2014; Structural design & modeling; electro-mechanical design; preparation of structural and electro-mechanical execution drawings, BOQ, and specifications
      • Riyadh intersection, lane addition to an existing bridge, Saudi Arabia, Krimmley Contracting Company, 2013-2014; Architectural & Structural preliminary designs, and preparation of design alternatives and feasibility studies
      • Lot 3903 Musaitbeh, Jnah, Beirut, Lebanon, Imad Taher, Architect Rachid Karam, 2014-2019; Structural design & modeling; electro-mechanical design; preparation of structural and electro-mechanical execution drawings, BOQ, and specifications; and supervision of concrete construction
      • BDD HUB Bachoura, Beirut, Lebanon, ZEN s.a.l, 2014; Structural design & modeling – Conceptual studies
      • Hariri Memorial, Beirut, Lebanon, Solidere, Architect Rachid Karam, 2014; Structural design & supervision
      • Pixel Tower, Lot 457 Mar Elias Street, Beirut, Lebanon, M1 Group, Architect Batimat sal, 2014; Structural design & modeling and preparation of structural execution drawings, BOQ, and specifications
      • Verdun New Rawda, Beirut, Lebanon, Achour Holding, 2014; Structural design & modeling and preparation of structural drawings, BOQ, and specifications
      • Phoenicia University, Sarafand – South of Lebanon, Phoenicia University, 2015; Architectural and structural designs of a commercial area of the new university campus in the South of Lebanon
      • BBD Temp, Bachoura 1075, Beirut, Lebanon, ZRE, 2015; Structural design & modeling, electro-mechanical design, preparation of structural and electro-mechanical execution drawings, BOQ, specifications including supervision and quality control
      • HAVANA HILLS, Lot 4343 Musaitbeh, Beirut, Lebanon, Shaer and Chahrour, 2015; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Lot 3680 Achrafieh, Beirut, Lebanon, Quantum Rising sal, 2015-2016; Complete architecture, structural, & electro-mechanical designs and preparation of tender documents
      • Lot 40 Ain El Mreisseh, Beirut, Lebanon, Jamil Ibrahim EST, 2015; Structural design & modeling and preparation of structural drawings, BOQ, and specifications
      • Historical House on Lot 633 Mina El Hoson, Beirut, Lebanon, Architect BATIMAT sal, 2015; Assessment and structural design of repair and retrofitting works of the existing house 
      • Green Land, Dahr El Sawan, Metin, Lebanon, Prime Consult, 2015: Geological survey and assessment for this proposed development. The geoelogical study defined the site and relevant adjacent areas in reference to geologic units and geologic structures at appropriate scale for the proposed development/engineering works. Preliminary analysis and recommendations associated with the specific project development conceptual design/layout: Roads, Built Areas/zones
      • Ramlet Al Bayda Public Garden, Beirut, Lebanon, All Design trades are donation to the City of Beirut, Architect Accent DG, 2015; Structural design & modeling; electro-mechanical design; preparation of structural and electro-mechanical execution drawing, BOQ, and specifications
      • Sky patio, Lot 145-01 Marfaa, Beirut, Lebanon, Azadea, Local Architect ASAM sal (Ayman Sanyoura), International Architect MVRDV, 2015; Structural design & modeling and preparation of structural drawings, BOQ, and specifications 
      • Lot 151-71 Marfaa, Beirut, Lebanon, Mr. Wajdi Abu Hamzeh: Local Architect BATIMAT, International Architect Bolles+Wilson, 2015; Structural design & modeling; preparation of structural drawings, BOQ, and specifications; and supervision and inspection duties on all structural elements during construction. Project was halted after Conceptual Phase
      • Beirut Digital District (BDD), Two office buildings on Lots 1227 & 1229 Bachoura, Beirut, Lebanon, ZEN sal, Architect Paralx sal, 2015-2019; Structural design & modeling; preparation of structural drawings, BOQ, and specifications; and supervision of concrete construction works
      • Private Residential Complex, Aana, Bekaa, Lebanon, Confidential Client, Architect: JAR Group Consultants, 2016; Structural design & modeling, preparation of structural execution drawings, BOQ, and specifications
      • Private Villa in Wasl, Dubai, United Arab Emirates, Mr. Marwan Dalloul, 2016-2018; Structural design & modeling; electro-mechanical design; preparation of structural and electro-mechanical execution drawings; BOQ, and specifications
      • Residential and Commercial Building on Lot 1987, Mar Elias Street, Beirut, Lebanon, Mr. Jihad Al Arab, 2016-2019; Complete architecture, structural & electro-mechanical designs and preparation of tender documents and supervision of execution works
      • Office Building on Lot 1524 Bachoura – Beirut Central District, Mr. Kassem Hejeij, 2016-2018; Structural design & modeling; electro-mechanical design; preparation of structural and electro-mechanical execution drawings; BOQ and specifications
      • Villa AK, Beirut, Lebanon, Batimat sal, 2018; Structural design & modeling and preparation of structural execution drawings, BOQ, and specifications
      • Lot 1646, Achrafieh, Beirut, Lebanon, Batimat sal 2018: Structural design & modeling and preparation of structural execution drawings, BOQ, and specifications 

5.2 Design and supervision of steel structures

      • Najjar Hospital, Beirut, 2001-2002; CBA Group & Mr. Rafic Najjar, Design and supervision of the structural steel frame of the hospital extension buildings
      • Abu Dhabi University Buildings, Directorate of Military Works, ALGECO, 2008; structural design and preparation of the shop drawings of the major steel staircases
      • Gym Project, Abu Dhabi, ALGECO (Al AIN Contracting Company L.L.C.), 2009; Structural design & modeling, and preparation of structural drawings of the structural steel roof frames
      • City Center Project, Hazmieh, Lebanon, A-Metal (Mimar), 2012; structural design review of steel brackets
      • king Abdullah Bin Abdul Aziz Third Expansion of Holy Haram, Makkah, Saudi Arabia, A-Metal, 2012; structural Design and Shop Drawings for steel brackets and steel frames supporting marble and granite cladding in zones 1 to 6
      • Passenger Terminal building Zone F – King Abdul Aziz International Airport, Saudi Arabia, A-Metal, 2013-2014; structural Design of steel frames to support Gypsum False ceilings including seismic loads

5.3 Technical control, Value engineering, and Quality assurance

      • Pharmacy Building of the Lebanese University Campus, Hadath, ZUBLIN, 1998-99; review and checking of the structural execution drawings
      • Parking structure of the Souks of Beirut, SOLIDERE, 2000-2001; review of the design
      • Beirut Emerging Technology Industrial and Research Center (BETZ), 2001-2002; Expert consultant and Coordinator of the Beirut Team for "Graeber Simmons & Cowan” of Austin, Texas. The project is locally administered by IDAL (Investment Development Authority of Lebanon)
      • Al Habtoor City Center or Metropolitan City Center (Al Habtoor Group), Horsh Tabet, Fall 2002-2003; Technical control and Value engineering: Checking and reviewing the structural design, the earthquake modeling, and the execution drawings
      • Metropolitan Park, Haret El Sit, Al Habtoor Group, September 2003 – Spring 2004; Technical control: Geological and hydro-geological mapping, geotechnical stability analysis, and reviewing the foundation structural design
      • Mohamad Al Amine Mosque, SOLIDERE, Oger Liban, 2003-2004; Technical control and structural design review
      • Al-Farouq Mosque, Zaidaniyyeh, Beirut, Oger Liban, Fall 2004; Technical control and review of the structural design of provisions required to install an electric escalator in the mosque
      • Aircraft shelters, UAE, Al-Ain General Contracting Company ALGECO, December 2005; Review of the structural design, Value engineering
      • Zahle solid waste management facility, Zahle, Beka, LACECO/AUB, Fall 2006; Technical control: Review of the structural design of the reinforced concrete and structural steel elements of the facility
      • Saraya Aqaba Project, Aqaba, Jordan, Saudi Oger Jordan, Summer 2009; Value engineering studies & design review for all structures in Zones M, B, L, & T
      • Towers H2 & H15 of Jabal Omar Development Project, Makkah, Saudi Arabia, Saudi Oger LTD, 2009-2010; Value Engineering studies & design review
      • Skygate Tower, Beirut, Lebanon, AlSaad General Contracting SAL, Fall 2009-2010 and Spring 2010; Value engineering studies & design review of the Structural and MEP trades
      • Al Wataniyah Tower, Abu Dhabi, United Arab Emirate, Projacs International, 2010; Structural design review and Value engineering studiesThe Forbes Tower, 43 story commercial building with 33,000 m2 built - up area, Manama, Kingdom of Bahrain, Arab Architects, 2014; structural design peer review and value engineering studies
      • Essence of Dilmunia, Kingdom of Bahrain, Cooperation investment house, 2015; Structural design review and value engineering studies
      • Assima Development, Kuwait, D.G. Jones, 2015; Structural peer design review and Value engineering studies

5.4 Evaluation and strengthening of reinforced concrete structures

      • Idriss bldg., Al Marfaa, Lot 1153, Beirut, 1995; evaluation and strengthening
      • Jishi residential bldg., kaskas, Beirut, 1995; evaluation and strengthening
      • Dandashli residential bldg., Mar Takla, 1995;evaluation and strengthening of columns and foundation
      • Mediterranean Group tower (formerly Kazan), Beirut Central District, 1997; Earthquake analysis and strengthening
      • Pavement of Beirut Central district (BCD), SOLIDERE, 1998; evaluation
      • Dandan Bldg., Bir Hassan, 1998; evaluation and strengthening of the structural frame
      • Mediterranean Group tower (formerly Kazan), Beirut Central District, 1997-2001; structural consultant on various remodeling and strengthening operations
      • Twenty-six structures along the new Sofar-Mdeirej Highway, Sofar and Sharon, Council for Grand Projects of the Ministry of Public Works and Transport, 2001; Structural and geotechnical assessment
      • Yassine (Solh) Residential Building, Al-Manara, Beirut, 2001; Strengthening of the structural frame and design of additional floors and roof landscaping system
      • Mediterranean Bank, Verdun Branch, Beirut, October-November 2002; structural consultant on the remodeling and strengthening operations
      • Louloua Bldg. , Rawche, Beirut, July – December 2002; MAK (Al-Khorafi), Quality and technical control of all structural concrete and structural steel works concerning the repair and strengthening procedures
      • Al-Mawarid Bank Headquarters (formerly Fontana Bldg.), Abdul Aziz St., Beirut, September 2002; Checking and evaluating the structural rehabilitation and strengthening design file
      • Hasan Hjeij Residence, Deir Kantar, South Lebanon, October 2002; Checking the concrete strength of miscellaneous secondary structural elements
      • Lot 1779 Achrafiyyeh, 1330 park Avenue s.a.l. (Daouk), October 2002; Checking the structural design and designing strengthening procedures
      • Mediterranean Bank, Tarik El-Jadida Branch, Beirut, October-November 2002; structural consultant on the remodeling and strengthening operations
      • Hassan Kattan Bldg., Lot No. 2801, Majdel Baana, Fall 2003; Design of strengthening of the foundation and structural frame
      • Shahine Bldg., Bwarej, May 2003; Stability analysis of the slope and strengthening of the slope by piling
      • Aley Vocational School, Lot No. 2430, CDR, August 2003; Structural and Geotechnical assessment
      • Palace of Justice and Ministry of Justice, Directory of Buildings, Ministry of Public Works and Transport, Beirut, 2003; Structural and Geotechnical assessment
      • Chekka Tunnel, Chekka, North Lebanon, CDR, 2003–2004; Structural, geotechnical, geological, and hydro-geological assessment and developing strengthening and rehabilitation procedures, drawings, and bidding documents
      • Residential Bldg., Lot 6499 Bir Hassan, Ziad Jabr; Structural Evaluation and repair and strengthening of the basement walls
      • Residential Complex on Lot 666, Hamana, Akaria Company, March 2004; Slope stability analysis and strengthening and upgrading of existing reinforced concrete structures
      • Manara 587, Beirut, RAMCO, Summer 2004; Evaluation of concrete strength and structural design of new roof structure
      • Al-Rahman Mosque, Tripoli, Wakf Al-Rahman Mosque, Summer and Fall 2004; Structural strengthening and repair
      • Al-Kamal Bldg., Lot No. 17, El-Saifi, Beirut, MAK (Khorafi), Summer and Fall 2004; Structural assessment and design of strengthening procedures and supervision of the war-damaged building
      • Schools in Akkar, Dinneyyeh, Batroun, Koura, and El-Matn, Ministry of Education, Summer and Fall 2004; Structural evaluation and preparation of tender documents for the repair and strengthening procedures
      • Daroun-Harisa Public school, Ministry of Education, March 2005; geotechnical site investigation and foundation provisions
      • Ksara Substation 400/220 kV, Ksara, Bekaa, United Contracting Company (UCO) Mr. Antoine Barmaki, April-May 2005; Structural investigation report
      • Mohammad Al Amine Mosque, Abu Samra, Triploi, Awkaf Department in North Lebanon, September 2005; structural evaluation and provision of repair and strengthening drawings and procedures
      • Several public schools in North Lebanon, Ministry of Education, 2005-2006; supervision of repair and strengthening works
      • Kwashra school in Akkar, North Lebanon and Jnah school in Jnah, Baabda, Ministry of Education, 2006; Structural evaluation and preparation of tender documents for the repair and strengthening procedures
      • Hinnawi Bldg., Lot 4055 Musaitbeh, Beirut, Summer 2007; Structural evaluation and provision of repair and strengthening drawings and procedures for the fire-damaged building
      • Kreidiyeh Residential Bldg., Lot 2411 Hammana, Mount Lebanon, 2009; Geotechnical and structural evaluation and provision of repair and strengthening drawings and procedures
      • Mousalli Bldg., Lot 395 Mosaitbeh, Beirut, 2012; Structural evaluation and design of structural retrofitting and strengthening works
      • Building on Lot 802/803 Ain Al Mreisseh, Beirut, Sea Blue Company, 2012; Structural evaluation and design of structural retrofitting and strengthening works
      • Building on Lot 984, Tyre, South Lebanon, BLOM Bank, 2013; Structural evaluation and design of structural retrofitting and strengthening works
      • Lot 2990 Ras Beirut, Beirut, Lebanon, Central Bank of Lebanon, 2013; Structural evaluation and assessment to support additional loads for an existing old building, and provision of cost estimates for the required repair works
      • Lot 60 Ras Beirut, Beirut, Lebanon, Central Bank of Lebanon, 2014; Structural evaluation and assessment to support additional loads for an existing old building, and provision of cost estimates for the required repair works
      • Historical House on Lot 633 Mina El Hoson, Beirut, Lebanon, Architect BATIMAT sal, 2015; Assessment and structural design of repair and retrofitting works of this existing house

5.5 Evaluation and strengthening of bridges

      • Reinforced concrete bridges, North Lebanon, Gezairi Transport Company, February-March 2006; Design and supervision of structural steel strengthening procedures of two bridges (New Bahsas river bridge and Old chekka bridge) to pass a 328-Tons load

5.6 Execution of strengthening and repair projects as a contractor (Design/Build)

      • Twelve schools in Baalbeck and Hermel in the Bekaa, Swiss Agency for Development and Cooperation, Summer and Fall 2006; Design, management, and execution of repair and strengthening schemes of the 12 schools
      • Dibil Public School in the South (Kadaa Bint Jbeil), UAE Program to Support and Reconstruct Lebanon, 2006-2007; Design, management, and execution of complete repair, strengthening, and upgrading procedures
      • Hinnawi Bldg., Lot 4055 Musaitbeh, Beirut, Summer 2007; Structural assessment and execution of repair and strengthening procedures for the fire-damaged building
      • An office apartment in Tripoli, North Lebanon for Oger Liban, Summer 2007; Execution of renovation works
      • Two Platoons for the Internal Security Forces, Mech Mech and Mashta Hassan, Akkar, North Lebanon, UAE government, 2007-2009; Structural design review and complete execution of all structural, architectural, electrical, and mechanical works
      • Abdul Aziz Al Mutawa Villa, Lot 671 Chemlan, Mount Lebanon, 2007-2008; Structural assessment and execution of the complete repair and reconstruction works
      • Kreidiyeh Residential Bldg., Lot 2411 Hammana, Mount Lebanon, 2009; Execution of geotechnical and structural strengthening procedures
      • Jnah school in Jnah, Baabda, Mount Lebanon, Hariri Foundation, 2009; Execution of structural repair and strengthening procedures, and execution of upgrading architectural and electro-mechanical works 
      • Sipes Factory in khaldeh, Lebanon, Mr. Wajih Bizri, 2010; Design and execution of structural repair and strengthening procedures 
      • Ain El Mraiseh 513, Beirut, Lebanon, Building Owners, 2010-2011; Design and execution of structural repair and strengthening procedures
      • House of Parliament, Beirut, Lebanon, 2010; Design and execution of new structural steel frame in the south-west wing of the building to enable removal of several R/C columns
      • House of Parliament, Beirut, Lebanon, 2011; Design and execution of new extension building
      • Bashoura 1082, Beirut, Lebanon, Amlak sal, 2012-2013; Design and execution of structural repair and strengthening procedures
      • Ain El Mraiseh, Lot 581, Beirut, Lebanon, Building Owners, 2013; Design and execution of structural repair and strengthening procedures 
      • Bashoura 1243, Beirut, Lebanon, ZEN sal, 2013-2014; Complete architectural structural and MEP designs and execution of structural repair and strengthening procedures
      • Lot 1378 Marfaa, Beirut, Lebanon, Central Bank of Lebanon, 2014; Structural evaluation and assessment and execution of structural repair and strengthening procedures
      • Pearl Bldg. Lot 3086 Ras Beirut, Rawche, Beirut, Lebanon, National Investment Company sal & Sofrem 1939 sal Holding, 2015; Structural assessment and execution of structural repair and strengthening procedures in the transfer floor (first floor) of the building
      • Lot 1281 Bachoura, Beirut, Lebanon, ZEN sal, 2016; Structural assessment and execution of structural repair and strengthening procedures of the existing historical building and changing the framing system from a sandstone wall bearing system to a combined reinforced concrete and structural steel system
      • Bella Fiesta, Beirut, Lebanon, Mr. Fadi Al Daouk, 2018-2019; Execution of structural repair and strengthening procedures
      • Bourj El Barajneh Lot 2101, Beirut, Lebanon, High Relief Committee Beirut, Lebanon, 2018; Execution of structural repair and strengthening procedures

 

All Rights Reserved © 2009 - Designed and Developed by: e-gvision.com